Band Heaters

CERAMIC JACKETED HEATERS

To heat the cylinders (barrels) on all types of plastic processing machinery

Outer insulation jacket conserves energy
Power savings upto 30%
Maximum watt density=50 watts/square inches
Maximum sheath temperature up to 800 deg C
Use of special ceramic material “steatite” with high thermal conductivity
The model is design & constructed with special effective dual insulation which reduces the rate of heat radiation/loss, resulting in swift rise in the temperature of the object to be heated

CERAMIC BAND HEATERS

To heat the cylinders (barrels) on all types of plastic processing machines

Maximum sheath temperature up to 480 deg C
Maximum watt density=25 watt/square inches
The built in insulation is specially formulated for the excellent heat reflection & performance capabilities
Flexible one or two-piece design makes installation faster & easier. Its flexible construction also allows the heater to be opened to the full diameter of the cylinder.

a) Dia: 65mm and up.
b) Width: 38mm and up.
c) Voltage: Up to 480V (single or three phase)
d) Watt Density: Up to 50 W/Sq. in.

MICA BAND HEATERS

Mica band heaters are widely used to heat the moulds, dies, nozzles and especially to heat the cylinders (barrels) on all types of plastic processing machinery

Maximum sheath temperature up to 480 deg C
Maximum watt density=25 watt/square inches
The built in insulation is specially formulated for the excellent heat reflection & performance capabilities
Flexible one or two-piece design makes installation faster & easier. Its flexible construction also allows the heater to be opened to the full diameter of the cylinder.

a) Dia: 2” or 50mm and up
b) Width: 1” or 25mm and up.
c) Voltage: Up to 480V (single or three phase)
d) Watt Density: Up to 25W/Sq.in.

PERFORATED CERAMIC HEATER

For use on extrusion machinery or on any heat/cool operation.
Have 60% open performed metal sheath, which assures maximum surface area exposure.
Use of special ceramic material “steatite” with high thermal conductivity.

a) Dia: 3” or 75mm and up
b) Width¨2” or 50mm and up.
c) Voltage: up to 480V (single or three phase)
d) Watt Density: Up to 45W/Sq.in.

Pool Heater Installation